Return to Previous Page
Jet-Tech XG-37 Low Temp Rotary Glasswasher
More Views
Details
Standard Features:
General Plumbing [Hot water and cold water required]
Drain
Rinse Aid
Operation / Capacity
Detergent, Sanitizer, and Rinse Aid containers are stored externally. The side cut-out in the machine provides space for three one-gallon chemical containers within the 24 x 24" foot print of the machine.
Optional Accesory
- Fill and dump style cycle uses less water and energy than traditional rotary glasswashers.
- Unit plugs into standard 120V electrical outlet for an easy installation.
- Computer controlled fill cycle allows for 75°F (24°C) rinse, providing clean glasses that are cool to the touch.
- The sliding cover and cold water rinse prevent steam from escaping during and after the cycle.
- Unique drainboard top provides integrated glassware landing area.
- Exclusive design with side notch provides space for three one-gallon chemical containers within the 24" by 24" foot print.
- Conveyor advance switch rotates conveyor one-half turn for easy loading and unloading of glassware.
- Covers and drainboard top are easily removable for cleaning access.
- Pre-programmed de-liming cycle for easy removal of mineral deposits during maintenance (de-liming agent must be added).
- Conveyor and stationary spray box are easily removed for cleaning and visual inspection.
- Automatic peristaltic metering pumps accurately dispense detergent, sanitizer, and rinse aid.
General Plumbing [Hot water and cold water required]
- Plumb with 1/2" water supply. Adapt to 3/8" FMPT
- Minimum water pressure is 25 PSI
- Maximum water pressure is 100 PSI. Install water pressure - regulator if line pressure is over 100 PSI. Water valve on unit has built-in strainer and flow control to provide consistent volume between 25 and 100 PSI
- Install separate water shut-off valve
- Unit has built-in air gap - vacuum breaker is not required Consumption is 3 gallons per cycle
- Maximum temperature is 150°F (66°C)
- Minimum temperature is 130°F (54°C)
- No minimum temperature requirement
Drain
- 1-1/2" tailpiece.
- Use open type floor drain for maximum drainage
- 120V, single phase, 60Hz, 6-foot grounded cord included
- Dedicated 15 amp circuit recommended
- Power requirements - 3.5 amps
- Extra heavy duty, non-foaming, commercial liquid dishwashing detergent is required - .30% concentration
- Consult local chemical supplier to match detergent with local water conditions
- Liquid chlorine bleach (sodium hypochlorite - 5.25% solution) adjusted to 50 ppm
Rinse Aid
- Liquid Rinse Aid adjusted for proper sheeting
Operation / Capacity
- 120°F (49°C) minimum wash temp and rinse temp adjustable down to 75°F (24°C)
- 2 minute 15 second cycle
- 2-3/4" diameter bar glasses - 41 per cycle
- 2-1/2" diameter bar glasses - 49 per cycle
- Maximum glass height 10"
- 20 gauge stainless steel parts include: cabinet
- 18 gauge stainless steel parts include: floor and tanks
- 16 gauge stainless steel parts include: leg mounting brackets and legs
- 11 gauge stainless steel parts include: drive wheel
- Front panel is removable for service
Detergent, Sanitizer, and Rinse Aid containers are stored externally. The side cut-out in the machine provides space for three one-gallon chemical containers within the 24 x 24" foot print of the machine.
Optional Accesory
- Export transformer 220V/50Hz electrical (price on request)
- Product Description
-
Details
Standard Features:- Fill and dump style cycle uses less water and energy than traditional rotary glasswashers.
- Unit plugs into standard 120V electrical outlet for an easy installation.
- Computer controlled fill cycle allows for 75°F (24°C) rinse, providing clean glasses that are cool to the touch.
- The sliding cover and cold water rinse prevent steam from escaping during and after the cycle.
- Unique drainboard top provides integrated glassware landing area.
- Exclusive design with side notch provides space for three one-gallon chemical containers within the 24" by 24" foot print.
- Conveyor advance switch rotates conveyor one-half turn for easy loading and unloading of glassware.
- Covers and drainboard top are easily removable for cleaning access.
- Pre-programmed de-liming cycle for easy removal of mineral deposits during maintenance (de-liming agent must be added).
- Conveyor and stationary spray box are easily removed for cleaning and visual inspection.
- Automatic peristaltic metering pumps accurately dispense detergent, sanitizer, and rinse aid.
General Plumbing [Hot water and cold water required]- Plumb with 1/2" water supply. Adapt to 3/8" FMPT
- Minimum water pressure is 25 PSI
- Maximum water pressure is 100 PSI. Install water pressure - regulator if line pressure is over 100 PSI. Water valve on unit has built-in strainer and flow control to provide consistent volume between 25 and 100 PSI
- Install separate water shut-off valve
- Unit has built-in air gap - vacuum breaker is not required Consumption is 3 gallons per cycle
- Maximum temperature is 150°F (66°C)
- Minimum temperature is 130°F (54°C)
- No minimum temperature requirement
Drain- 1-1/2" tailpiece.
- Use open type floor drain for maximum drainage
- 120V, single phase, 60Hz, 6-foot grounded cord included
- Dedicated 15 amp circuit recommended
- Power requirements - 3.5 amps
- Extra heavy duty, non-foaming, commercial liquid dishwashing detergent is required - .30% concentration
- Consult local chemical supplier to match detergent with local water conditions
- Liquid chlorine bleach (sodium hypochlorite - 5.25% solution) adjusted to 50 ppm
Rinse Aid- Liquid Rinse Aid adjusted for proper sheeting
Operation / Capacity- 120°F (49°C) minimum wash temp and rinse temp adjustable down to 75°F (24°C)
- 2 minute 15 second cycle
- 2-3/4" diameter bar glasses - 41 per cycle
- 2-1/2" diameter bar glasses - 49 per cycle
- Maximum glass height 10"
- 20 gauge stainless steel parts include: cabinet
- 18 gauge stainless steel parts include: floor and tanks
- 16 gauge stainless steel parts include: leg mounting brackets and legs
- 11 gauge stainless steel parts include: drive wheel
- Front panel is removable for service
Detergent, Sanitizer, and Rinse Aid containers are stored externally. The side cut-out in the machine provides space for three one-gallon chemical containers within the 24 x 24" foot print of the machine.
Optional Accesory- Export transformer 220V/50Hz electrical (price on request)
